Commentaires sur : TriWiiCopter design

Par : Help - Introduzione ai tricotteri/quadricotteri - Pagina 2 - BaroneRosso.it - Forum Modellismo

Fri, 07 Sep 2012 21:13:13 +0000

[...] control-board (baronerosso) Y6 con eliche protette (baronerosso) ARCH001 NEW-TRICOPTER Triwiicopter-design Folding Tricopter for AP/AV/FPV Build a [...]

Par : Murkelcopter – der MultiWii Copter zum Selberbauen (Stand: 28.1.2012) | Flugwiese

Sat, 21 Jul 2012 20:36:58 +0000

[...] Lageregelung wird auf die Hard- und Software des MultiWII-Copter Projektes von http://radio-commande.com/international/triwiicopter-design/ zurückgegriffen. Auf der Basis eines Nintendo WII-Contollers und eines ARDUINO-Microcontrollers [...]

Par : Omnimusha

Omnimusha — Fri, 04 Nov 2011 02:25:50 +0000

?????

Par : Omnimusha

Omnimusha — Tue, 01 Nov 2011 15:17:10 +0000

Hi, I’m using the wii nunchuk and arduino. I connected and all good.
but, as I can convert the data information in angles and “G”?

AccX = 512
AccY = 524
AccZ = 740

Par : Ethan

Ethan — Sat, 13 Aug 2011 05:41:31 +0000

Hello! I have an issue with my tricopter. I have uploaded the firmware and everything seems to have worked properly, but when I open up the conf there is no data.

Par : Alvaro Periquito

Alvaro Periquito — Sun, 19 Jun 2011 07:14:05 +0000

hello, i need some help, i use mystery 12A ESC PWM 8 or 16Khz, the parameter you put to change is the same for this ESC? thanks and sorry for mi english

Par : Olu

Olu — Sun, 13 Mar 2011 22:32:54 +0000

GPS position Hold GPS position Hold GPS position Hold GPS position Hold

Par : Olu

Olu — Mon, 28 Feb 2011 23:44:42 +0000

Is there any upgrade to the TriWiiCopter, I mean adding GPS, OCD, plus more sensors?

Par : djlorenzo

djlorenzo — Sat, 29 Jan 2011 00:29:19 +0000

Im trying to get the code working, but my problem is that pitch correction is fine. But roll correction is amplifying the roll error, how would i go about making the correction negative? I really can’t seem to get it working in the code. Could anyone help?

Par : Patrick

Patrick — Sat, 22 Jan 2011 20:45:59 +0000

« 6) Arduino seems to operate well (LED blinking), but impossible to connect the GUI

If you are using windows, the port COM needs something to be reconfigure to run at 115200Hz. »

Can anyone describe how to set the baud rate on a Windows 7 System ? I am logged in as an Admin, but when I want to open the « Preferences » on the USB/Serial thing, it says that I need to have writing permisson on the regestry. I have writing permission
So I can’t change the baud rate to 115200 – i guess that’s why the gui is not working…

Patrick